●
●
●
①
②
③
①
②
１２
the displayer that fixed on panel first before cleaning the front
panel for preventing water from damaging it.Never use the
Clean and care
CAUTION
Turn power off and pull out the power plug before cleaning air conditioner. Or it may
cause electric shock.
Never sprinkle water on the indoor unit and the outdoor unit for cleaning because it
can cause electric shock.
Volatile liquid (e.g. thinner or gasoline) will damage the air conditioner. (So wipe the
units with a dry soft cloth, or a cloth slightly moistened with water or cleanser.)
Clean the front panel(make sure to take it off before cleaning)
Take off the front panel
Along the direction of arrowhead to lift up the front panel,
and after disassembled the displayer, pull the front panel
at the both slots of the front panel,then take it off.
Washing
Clean with a soft hairbrush, water and neutral detergent,
then to dry it in the shade.(Note: Before cleaning, take out
water above 45
℃
to wash the panel, or it could cause
deformation or discolouration.
Install front panel
Place two supporters of the front panel into the slots,
along the direction of arrows
,
cover and clasp the
front panel. As show in Fig.4(a,b)
Fig. 4
Along the arrowhead direction,open an angle at both
slots of front panel, then pull the air filter downward and take
it out. As show in Fig. 5 (a, b).
Cleaning
NOTE: There are microcomputer components and circuit diagram on the LCD of front panel.
If dust is much more around the air conditioner, the air filters should be cleaned many
times. After taking off the filter, don't touch the fin of indoor unit, in order to avoid hurting your
fingers.
Take down the air filter
To clean the dust adhering to the filters, you can either
use a vacuum cleaner, or wash them with warm water
When the filters are very dirty (such as oil stain on) adopt
water with neutral detergent (should below 45
℃
) , and then
dry it in the shade.
NOTE: Never use water above 45
℃
to wash, or it can
cause deformation or discoloration. Never dry it by
fire, or it can cause fire or deformation.
Cleaning the air filters (Recommended once every three months)
（ａ）
（ｂ）
Fig.5
（ａ
）
（ｂ）
