９
●
℃
●
●
●
●
●
Operation of wireless remote control
Names and functions of wireless remote control
This wireless remote control is general, and it could be used for many units, some buttons
of this control which are not available to this unit will not be described below.
Wireless remote control
SLEEP
TURBO button
TURBO
At COOL and HEAT mode, press this button
could set TURBO ON (and displays "TURBO")
or OFF ("TURBO" disappear).
After powered on, it is default to TURBO
OFF. At AUTO, DRY, FAN mode, the TURBO
function cannot be set, and there is no
"TURBO" displayed.
BLOW
BLOW button
SLEEP
button
At COOL and DRY modes, press this button, could
set BLOW ON (and Displays the "BLOW") or OFF (the
"BLOW" will disappear). After powered on,that is default
to BLOW OFF. At AUTO, FAN or HEAT modes, the
BLOW function cannot be set, and there is no "BLOW"
displayed.
Pressing this button, enter into SLEEP state or
quit the SLEEP state. After unit is turned off and
cancel the SLEEP function. At FAN and AUTO
mode, the SLEEP function cannot be set.
It is for SLEEP.
At COOL, DRY mode: Enter into SLEEP state
and after one hour running later, the temp. of
main unit be increased 1 , 2hours later, the
setting temp. will be increased 2 , after pressing
this button, the unit normally runs at the setting
temp.
In HEAT mode: After entered the SLEEP mode
and run for 1hour later, the temperature of main
unit will be decreased 1 , 2hours later, setting
temperature will be decreased 2
, after pressing
this button, the unit normally runs at the setting
temp. After SLEEP mode is set up, the setting
of wireless remote control will not change.
℃
℃
℃
Light
LIGHT button
Pressing this button, can select the Light On
and Light Off.
