14
Installation of Heat Discharge Pipe
2.
3.
4.
Insert joint A of heat discharge pipe into the gro-
ove until you hear a sound.
Lead the exhaust hose outdoors.
Correct installation is as shown in figure (When
installing it on wall,height of hall should not be
over 130cm from floor).
Window adapter(bottom)
1.
Window adapter(top)
Rotate joint A and joint Window adapter(top)+
Wrong installation is shown in following figure
(If the pipe is bent too much, it would easily
cause malfunction.)
Window adapter(bottom) into the two ends of
heat discharge pipe.
Connect Window adapter(top) to W indow
adapter(bottom).
Joint A
Heat discharge pipe
Window adapter(top)
Window adapter(bottom)
3.
2.
1. Attach the insect guard net to the window panel.
Optional 1:
Installation in a double window
Attach the window panel to the window stool.
Make sure that the exhaust cover is attached to
the window panel.
Inner width of the window:20.5"(520mm)
Use the window panel.
Optional 2-1:
Installation in a double-hung sash
window
Cut the sponge A (adhesive type) to the proper
length and attach it to the window stool and to
the bottom of sash.
Sponge A
Groove
joint A
130cm
