42
Maintenance
Service Manual
¦Y$!
1. In Cool, Dry or Heat mode operating, the condensation water will be drained to the chassis.(As show in Fig.6)
2. When the chassis is full with water, the buzzer will give out 8 sounds and "H8" is displayed to remind user to discharge water,the unit
will turned off about 2min latter,and all buttons are invalid.
To empty the chassis, please follow the instructions bellow.
¦V #$ ´
¦"# # ´
¦VX $## ## #$ $## ´
¦Y # #
¦$# Z #
¦+_*==
2.Use the continuous drainage option from the middle hole
NOTICE:
!# ! $ \ ^
(1) Remove the continuous drain cap 1 by turning it counter clockwise then remove the rubber stopper 2 from the spout. (As show
in Fig.7)
(2) Screw the drain connector to(included in the package) the spout by turning clockwise.(As show in Fig.8)
(3) Insert the drainage hose into drain connector.(As show in Fig.9)
ATTENTION:
When using continuous drainage option from the middle hole, place portable on a level surface and make sure garden hose is clear
of any obstructions and is directed downward. Placing portable on an uneven surface or improper hose installation may result in
$# $ # ! X#
and hose for proper setup.
Fig.7
Fig.6
Fig.9
Fig.8
