Installation instructions
Installation in a sliding sash window
Attach the guard combined above to the
window panel.
Push the insect guard net firmly to ensure
that its four projections fit into the holes in
the window panel.
1
Cut the foam seal A (adhesive type) to
the proper length and attach it to the
window frame.
2
Install the window panel into the window
frame.
3
If the inner height of the window is
between 22" (559mm) and 24" (609mm)
inclusive.
The window panel cannot be installed in
windows less than 22" (559mm) high, as
you will be unable to shut the exhaust
cover.
(1) Remove the adjustment panel from the
window panel, and cut the window panel
to the same height as the window.
(2) Open the window sash and place the
window panel on the window frame.
(3) Secure the window panel to the window
frame with screws.
24
Projection
Window
panel
Window
panel
Cut
22"~24"
Foam seal A
(adhesive type)
Exhaust cover
Adjustment panel
