5
Operation introduction for control panel
Operating methods
Sleep
6
Press sleep button to enter into sleep mode. If the controller operates at cooling
mode, after sleep mode is started up, preset temperature will increase by 2°C
within 2 hours and then the unit will operate at this temperature all the time; While,
if the controller operates at heating mode, after sleep mode is started up, preset
temperature will decrease by 2°C within 2 hours and then the unit will operates at
this temperature all the time. Sleep function is nor available for fan mode, drying
mode and auto mode. If sleep function is started up, the upper indicator will keep
the display status. Others, it won’t be displayed.
Please close the door and window, in order to obtain the better
dehumidifying effect:Press "MODE" key, select the "DRY" mode,
the unit will run in the "DRY" mode, at the same time, the upper
motor is running at the low speed, it is not adjustable.
DRY mode
When the unit runs in FAN mode, it can select 3 speeds.
FAN mode
COOL mode
1. To select a place near the door and window, install the
exhaust duct.
2. Press "MODE" key to select "COOL" mode.
3. Press " " or " " key to set the suitable temp.16°C(61°F)
~30°C(86°F).
HEAT mode
(not for only
cooling unit)
1. Press “MODE” key to select “HEAT” mode.
2. Press " " or " " key to set the suitable temp.16°C(61°F)
~30°C(86°F).
