Multi Variable Air Conditioners Fresh Air Series Indoor Unit
17
Fig 4.4.4 Air-Return Opening
Unit: mm
Model
Size of Air Outlet
Size of Air –returen Opening
A
B
C
D
GMV-NDX125P/A-T
197
1151
1362
264
GMV-NDX140P/A-T
197
1151
1362
264
GMV-NDX224P/A-T
192
992
1150
327
GMV-NDX250P/A-T
192
992
1150
327
GMV-NDX280P/A-T
192
992
1150
327
4.5 Installation of Wired Controller
Please refer to User Manual of Wired Controller for the installation details.
Note:
When installation is finished, the unit must be tested and debugged before operation. Please refer to
Instruction Manual of ODU for auto addressing and debugging details.
5 Wiring Work
Note:
(1) For personal safety, the air conditioner must be properly grounded.
(2) Read carefully the voltage indicated on the nameplate before connecting wires. Then connect
wires according to the wiring diagram. Improper wiring will lead to abnormal operation or
damage the unit.
(3) Power capacity should be large enough. Sectional area of room wires should be above
2.5mm².
(4) For unit's power supply, please use specialized branch circuit and specialized power socket.
(5) All wiring must comply with standards to ensure safe and correct operation.
(6) Install specialized branch circuit breaker according to related laws and regulations and
electrical standards.
(7) All wiring must use pressure terminal or single wire. Multi-twisted wire that connects directly to
the wiring board may cause fire hazard.
(8) Keep the wires away from refrigerant pipe, compressor and fan.
(9) Do not alter the inner wires of air conditioner. Manufacturer does not assume responsibility for
damage or abnormal operation due to this reason.
(10) If the unit is installed in places with strong electromagnetic interference, it's recommended to
use twin-twisted shield wire. During wire connection, please pay attention that the metal shield
layer of the twin-twisted wire must be grounded (outer case) in order to prevent the unit from
electromagnetic interference.