background image

 

 

To Users 

Thank you for selecting Gree product. Please read this instruction manual carefully before installing 

and using the product, so as to master and correctly use the product. In order to guide you to correctly 
install and use our product and achieve expected operating effect, we hereby instruct as below: 

(1)  This appliance can be used by children aged from 8 years and above and persons with reduced 

physical, sensory or mental capabilities or lack of experience and knowledge if they have been 
given supervision or instruction concerning use of the appliance in a safe way and understand 
the hazards involved. Children shall not play with the appliance. Cleaning and user 
maintenance shall not be made by children without supervision. 

(2)  In order to ensure reliability of product, the product may consume some power under stand-by 

status for maintaining normal communication of system and preheating refrigerant and lubricant. 
If the product is not to be used for long, cut off the power supply; please energize and preheat 
the unit in advance before reusing it.   

(3)  Please properly select the model according to actual using environment; otherwise it may 

impact the using convenience.   

(4)  This product can’t be installed at corrosive, inflammable or explosive environment or the place 

with special requirements, such  as kitchen. Otherwise, it will affect the normal operation or 
shorten the service life of the unit, or even cause fire hazard or serious injury. As for above 
special places, please adopt special air conditioner with anti-corrosive or anti-explosion 
function.   

(5)  If the product needs to be installed, moved or maintained, please contact our designated dealer 

or local service center for professional support. Users should not disassemble or maintain the 
unit by themselves, otherwise it may cause relative damage, and our company will bear no 
responsibilities. 

(6)  All the illustrations and information in the instruction manual are only for reference. In order to 

make the product better, we will continuously conduct improvement and innovation. If there is 
adjustment in the product, please subject to actual product. 

Summary of Contents for GMV-NDX125P/A-T































Reviews: