GMV DC Air Handler
14
(2) The connection of stranded wire (as shown in Fig.5.1.2)
1) Strip about 10mm (3/8 inch) insulation of the end of stranded wire by stripping and cutting
tool.
2) Loosen the wiring screws on terminal board.
3) Insert the wire into the ring tongue terminal and tighten by crimping tool.
4) Use the screwdriver for tightening the terminal.
Unit: mm(inch)
Fig.5.1.1 Fig.5.1.2
5.2 Power Cord Connection
All indoor units must be unified of power supply so that they can be powered
ON/OFF at the same time.
Fig.5.2
(1) Detach the electric box lid.
(2) Let the power cord pass through the wiring through-holes.
(3) Connect wires according to Fig. 5.2.
(4) Fix the power cord with wiring clamp.
Summary of Contents for GMV-ND09A/B-T
Page 24: ......
