background image

Multi Variable Air Conditioners Compact Cassette Type Indoor Unit 

1 Safety Notices (Please be sure to abide) 

 

WARNING!

 If not abide strictly, it may cause severe damage to the unit or the people. 

 

NOTICE!

 If not abide strictly, it may cause slight or medium damage to the unit or the 

people. 

 

This sign indicates that the operation must be prohibited. Improper operation may cause 

severe damage or death to people. 

 

This sign indicates that the items must be observed. Improper operation may cause 

damage to people or property. 

 

WARNING! 

This product can’t be installed at corrosive, inflammable or explosive environment or the 

place with special requirements, such as kitchen. Otherwise, it will affect the normal 

operation or shorten the service life of the unit, or even cause fire hazard or serious injury. 

As for above special places, please adopt special air conditioner with anti-corrosive or 

anti-explosion function. 

This Multi  VRF System shall only be connected to an appliance suitable for the same 

refrigerant. 

All  units in Manual Cover is a partial unit, complying with partial unit of IEC  60335-2-

40:2018, and must only be connected to other units that have been confirmed as 

complying to corresponding partial unit requirements of this international standard. 

The electrical interface shall comply with electrical security requirement, voltage shall be 

220-240V~50Hz or 208-230V~60Hz,current shall be referred to the table of “Dimension 

of power cord and capacity of air switch” in Section 3.4, and safety class of construction 

is

 

Please install the unit 
according to instructions in 
this manual. Read this 
manual carefully before 
starting up or checking the 
machine. 

 

Installation should be 
performed by dealer or 
qualified technicians. Do 
not install the product by 
yourself. Improper 
installation may result in 
water leakage, electric 
shock or fire hazard. 

 

Make sure the local power 
supply is in accordance with 
units before installation, and 
check the power supply 
carefully. 

 

This air conditioner must 
be properly grounded 
through the receptacle to 
avoid electric shock. The 
grounding wire shouldn’t 
be connected with gas 
pipe, water pipe, lightning 
arrester or telephone line. 

Summary of Contents for GMV-ND Series

































Reviews: