Multi Variable Air Conditioners Compact Cassette Type Indoor Unit
5
No.
Name
Appearance
Q'ty
Usage
4
Insulation
1
To insulate the gas pipe.
5
Insulation
1
To insulate the liquid pipe.
6
Flannelette
1
To prevent the communication wire
from reaching out the electric raceway.
7
Fastener(300mm)
1
To fasten the sponge.
8
Bolt sub-assy
4
Fix the panel.
9
Corrugated pipe
1
GMV-ND56T/E-T
10
Sponge
4
To insulate the drain pipe.
11
Gasket Mounting Board
1
Used to prevent gasket from falling off.
12
Fastener(200mm)
4
To fasten the sponge.
13
Bolt with Washer
4
To fix the installation paperboard on the
unit.
14
Enswathement
2
Used for winding the pipe connecting
the indoor and outdoor units.
15
Washer
10
To be used together with the hanger
bolt for installing the unit.
3.2 Installation Position Selection
(1) The location should be able to withstand the weight of unit.
(2) The water can be drained conveniently from drainage pipe.
(3) There should be no obstruction near air inlet and air outlet.
(4) Follow the installation distance required in the Fig.below to ensure sufficient space for
maintenance.
(5) The installation location should be far from heat sources, flammable or explosive gas, or
smog spread in the air.
(6) The appliance shall not be installed in the laundry.
(7) The indoor unit, outdoor unit, power cord and connection electricity wire should be at least
1m from television and radio in order to prevent interference and noise (Even though 1m
distance is ensured, there may be noise if the electric wave is too strong).
