- 1
0
-
5
Fan button
This button is used for setting Fan Speed in the sequence that goes from AUTO,
6
Sleep button
Press this button to go into the Sleep operation mode. Press it again to cancel
this function. This function is available in COOL, HEAT (Only for models with
heating function) mode to maintain the most comfortable temperature for you.
NOTE: There are 3 speeds for the Fan Speed of this model.
, , to then back to Auto.
Auto
Speed 1
Speed 2
Speed 3
3
+ / - button
Pressing “+” or “-” button once will increase or decrease set temperature
by 1°F(°C).
Hold “+” or “-” button for 2s, set temperature on remote controller will change
quickly.
Release the button after your required set temperature is reached.
Under timer setting status, after each pressing of “+” or “-” button, time will
increase or decrease 0.5h . Hold “ + ” or “-” button, 2s later, time displayed
on dual-8 nixie tube will change quickly. Loosen the button until the time is
reached to your set time.
●
●
4
Swing button
Press this button to turn “ON” & “OFF” swing.
●
Heat:
Under this mode, air conditioner operates under heating mode.
Press “Fan Speed” button can adjust the fan speed.(Cooling only unit won’t
receive heating mode signal. If setting heat mode with remote controller, press
ON/OFF button can’t start up the unit).
●
Fan Only:
Under this mode, air conditioner will not cool or heat, only blow
wind. Fan indicator will be on. Press “Fan Speed” button can adjust the fan
speed.
●
Dry:
Under this mode, the unit runs in low fan speed for dehumidification and
the corresponding indicator is on; under dry mode, the fan speed cannot be
adjusted.
