Introduction for buttons on remote controller
Press this button can select left & right swing angle. Fan blow angl e
can be selected circularly as below:
BUTTON
TURBO
"
) and Quiet mode (display " " ) and Quiet
QUIET
SLEEP
no display
(stops at current position)
This function is only available for some model.
Under COOL or HEAT mode, press this button to turn to quick COOL
or quick HEAT mode. " " icon is displayed on remote controller.
Press this button again to exit turbo function and " " icon wil l
disappear.`
Sleep 2 is sleep mode 2, that is air conditioner will run accordin g
to the presetting a group of sleep temperature curve.
Sleep 3-the sleep curve setting under Sleep mode by DIY;
Press this button, the Quiet status is under the Auto Quiet mod e
(display "
OFF (there is no signal displayed), after powered on, the Quiet OFF
is defaulted.
Press this button continuously more than 2s, the main unit will swin g
back an forth from left to right, and then loosen the button, the u nit
will stop swinging and present position of guide louver will be kept
immediately.
Under swing left and right mode, when the status is switched fro m
off to , if press this button again 2s later, status will switch to
off status directly; if press this button again within 2s, the chang e
of swing status will also depend on the circulation sequence state d
above.
Press this button, can select Sleep 1 ( ), Sleep 2 ( ), Sleep 3
( ) and cancel the Sleep, circulate between these, after electrified,
Sleep Cancel is defaulted.
Sleep 1 is Sleep mode 1, in Cool modes; sleep status after run for
one hour, the main unit setting temperature will increase 1
℃
, two
hours, setting temperature increased 2, then the unit will run at this
setting temperature; In Heat mode: sleep status after run for one
hour, the setting temperature will decrease 1
℃
, two hours, setting
temperature will decrease 2
℃
, then the unit will run at this setting
temperature.
36
If start this function, the unit will run at super-high fan speed to cool
or heat quickly so that the ambient temp. approaches the preset
temp. as soon as possible.
