13
DESCRIPTION
FUNCTION
Power Button
Turns air conditioner On and Off. Turning on the unit with remote controller,
the unit will operate in ENERGY SAVER mode.
Mode Button
Press the button to select a mode from the following options:
AUTO - COOL - ENERGY SAVER - DRY - FAN
Increase /Decrease
Button
Press + or - button to increase or decrease set temperature by 1º. Hold (+) or (-) button for 2
seconds to quickly adjust the temperature on the remote control.
Swing Button
Press to turn ON or OFF air flow oscillate
Fan Button
This button is used for setting Fan Speed in the sequence that goes from
AUTO — Speed 1 — Speed 2— Speed 3
Sleep Button
Press this button to operate in SLEEP mode. Press it again to cancel. This function is available in
COOL, DRY and ENERGY SAVER mode to maintain the most comfortable temperature.
Timer Button
Press this button to initiate AUTO-ON/AUTO-OFF timer
Press this button twice to cancel auto-timer
i-Feel Button
i-Feel function will activate after pressing this button. This will work with the rooms ambient
temperature, sending the remote programmed thermostat temperature to the unit every 10
minutes If power is lost this function will need to be reset.
Light Button
Press this button to turn on the display light. Press this button again to turn off the display light
Remote Control Operation
OPERATING INSTRUCTIONS
NOTICE:
•
The distance between remote and receiving window should be no more than 8 m
(26 ft.), and there should be no obstacles between them.
• When not using the remote control for extended periods of time, please take out
the batteries.
ADDITIONAL FEATURES AVAILABLE ONLY ON YOUR REMOTE.
Energy
Saver
Mode
Modes activated through Remote only
Auto
Mode
Dry
Mode
