BU Module
5
3
Selection of Installation Location and Precautions
WARNING
1)
The installation of the air conditioner must be in accordance with the national and local laws and
regulations.
2)
The quality of the installation will affect the capability of air conditioner directly. The installation
should be left to the appointed service center. Please contact your dealer after purchasing this machine.
Professional installation workers will provide installation and test services according to the installation
manual.
3)
The air conditioner should not install in this place where the small animals exist, because they may
cause malfunctions, smoke or fire. Please keep the area around the unit clean.
3.1
Selection of Installation Location
WARNING
1)
The BU module must be installed on a firm and solid support which can withstand the weight of the
module and the mounting surface must be horizontal plane. The BU module can be chosen to install in
the ceiling, such as the ceiling of parlor, corridor, balcony, storeroom and etc.
2)
The location must be out of children’s reach, please keep the unit away from children.
3)
The BU module is for indoor use. If installing in the outdoors, the location must be away from wind and
rain. Otherwise, it maybe causes water leakage, electric shocks or fire etc.
4)
There is enough space for the installation and maintenance.
5)
Avoid direct sunlight or other heat sources exist.
6)
Do not install in location that is hot or humid for long periods of time.
7)
Avoid the BU module installed in the bedroom and study, where these places need to be quiet.
8)
BU module cannot be installed in the place of inflammable and explosive materials and severe dust,
smoke and the other air pollution, such as the kitchen.
9)
There is enough space to install drainage pipe, so that the condensed water can be discharged.
10)
Installation at the following places might lead to the air conditioner malfunction, such as where is full of
machine oil, saline-sodic soil near the sea, sulphide fog, high frequency facilities or special conditions.
If it is unavoidable, please contact the appointed service center.
NOTICE
1)
Make sure that the unit will not cause any operating vibration or noise after installation.
2)
BU module shall be installed close to the indoor unit, hence to minimize the length and bends of
cooling pipe.
Summary of Contents for FXA2A-D
Page 4: ......
