25
Technical Information
Service Manual
8.
TURBO
button
9. I FEEL button
10.
Timer
button
11.
WiFi button
12. LIGHT button
Function introduction for combination buttons
Press " " and " " buttons simultaneously 3s to lock or unlock the keypad. If the remote
pressing any button, blinks three times.
controller is locked, is displayed. In this case,
▲
Combination of " " and " " buttons: About lock
▲
▲
▲
About switch between Fahrenheit and centigrade
Combination of "MODE" and " " buttons:
▲
At unit OFF, press "MODE" and " " buttons simultaneously to switch between
ć
and
̧
.
▲
Nixie tube on the remote controller displays
"SE". Repeat the operation to quit the function.
Combination of "TEMP" and "TIMER" buttons: About Energy-saving Function
Press "TEMP" and "TIMER" simultaneously in COOL mode to start e nergy-saving function.
(46
̧
if Fahrenheit is adopted). Repeat the operation to quit the function.
Combination of "TEMP" and "TIMER" buttons: About 8
ć
Heating Function
Press "TEMP" and "TIMER" simultaneously in HEAT mode to start 8
ć
Heating Function Nixie tube on the remote controller displays " "
and a selected temperature of "8
ć
".
Press this button to start I FEEL function and " " will be displayed on the remote controller. After this function is set,
the remote controller will send the detected ambient temperature to the controller and the unit will automatically adjust the
indoor temperature according to the detected temperature. Press this button again to close I FEEL function
and " " will disappear. When I FEEL function is turned on,the remote controller should be put within the area
where indoor unit can receive the signal sent by the remote controller.
will change quickly if holding " " or " " button).
Press this button again to confirm timer setting and the characters of HOUR ON (OFF)will stop flashing.
If the characters are flashing but you haven’t press timer button,timer setting status will be quit after 5s.
If timer is confirmer, press this button again to cancel timer.
● Under ON status, press this button to set timer OFF; Under OFF status, press this button to set timer ON.
● Press this button once and the characters of HOUR ON (OFF) will flash to be displayed. Meanwhile,
press " " button or " " button to adjust timer setting (time
Under COOL or HEAT mode, press this button to activate / deactivate the Turbo function.
▲
▲
▲
▲
Time setting range is 0.5~24hours.
Press this button to
turn on the display's light and press this button again to turn off the display's
light.
● This function is only available for some models.
Press "
WiFi
" button to turn on or turn off WiFi function. When WiFi function is turned on, the "
WiFi
" icon will be
WiFi module displayed on remote controller; Under status
displayed on remote controller; Under status of unit off, press "MODE" and "
WiFi
" buttons simultaneously for 1s,
will restore to factory default setting.
