Gree CA385000100 Service Manual Download Page 79

Page: 79 / 106

Installation and Maintenance

Service Manual

Procedure

Step

4. Remove right side plate

Screws

Protective grille

Remove the screws fixing right side plate and
then remove the right side plate.

Cut off the wire binder fixing the protective
grille and then remove the protective grille.

Right side plate

Nut

Remove the nut fixing axial flow blade and
then remove the axial flow blade.

5. Remove axial flow blade

Axial flow blade

6. Remove electric box assy

Remove the wiring terminals on electric box.
Screw off screw 1 fixing the electric box
assy and then remove the electric box assy.
Screw off the screws fixing compressor
capacitor.
Then remove the compressor capacitor.

Compressor
capacitor

Screw 1

Wiring
terminal

Electric box assy

Screw

Summary of Contents for CA385000100











































































































Search results

Summary of Contents for CA385000100

Reviews:

Related manuals for CA385000100

Brands by name

Popular brands

Gree CA385000100, Service Manual

Search results

Summary of Contents for CA385000100

Reviews:

Related manuals for CA385000100

Brands by name

Popular brands