24
1.1 Wheel usage and maintenance
TAKING CARE OF YOUR ZEAL
| 1. MAINTENANCE
REAR WHEEL
– Removing and re-fixing for tube changing, fixing
punctures, etc.
Dismantling procedure
• Remove the rear brake cable by loosening
and removing the bolt on the brake cable.
• Disconnect motor wires from wiring
harness. Disconnect the connector of the
motor and three motor wires (Blue, Green,
and Yellow) by loosening the nut.
• Remove the bolt and nut anchoring the
brake panel.
• Remove the bolts on both retainer plates
on either side of the rear stay.
• Loosen the axle nuts on both sides.
• Slide the wheel backwards through the
slot.
Assembling procedure
• Slide the wheel assembly on the stay slot,
keeping the retainer plates at the extreme
position on the axle shaft and keeping the
motor wires to the left of vehicle.
• Tighten the axle nuts on both the sides
and tighten the retainer bolts on both sides.
• Fix the brake panel with the provided bolt
and nut.
• Insert the brake cable through the anchor,
spring and turn-on. Tighten the bolt.
• Connect the motor wires by connecting
the connector to the sockets and three
motor wires by tightening the nut to the
corresponding sockets.
Summary of Contents for AMPERE ZEAL
