18
❏
11. Attach the ESC to the bottom of the motor box with a
piece of
adhesive backed
hook and loop material. Make
a hook and loop strap and secure the ESC to the motor box.
Connect the motor wires to the motor.
❏
12. Route the ESC lead out of the forward battery tray
and attach the tray.
❏
13. Connect the motor battery and check that the motor
is rotating the correct direction.
DO NOT INSTALL THE PROPELLER.
❏
14. Trim the covering from over the three cooling air exit
holes.
Glow Engine Installation
❏
1. The glow engine can be installed in two different
positions. Drill through the fi rewall at each appropriate mark.
Both engine mounting positions use the same throttle pushrod
exit hole.
Summary of Contents for ULTRA SPORT 46
Page 31: ...Notes 31...
