manualshive.com logo in svg

GREAT PLAINS Turbo Max 3500TM, Assembly Manual

Share
Download
GREAT PLAINS Turbo Max 3500TM Assembly Manual Download Page 7

3500-4000TM

Table of Contents

Index

Important Safety Information

Great Plains

 | 586-537Q-ENG | 04/26/2019

Table of Contents

Index

3

Tire Safety

Tire changing can be dangerous and should be performed by

trained personnel using correct tools and equipment.

When inflating tires, use a clip-on chuck and extension

hose long enough for you to stand to one side–not in front
of or over tire assembly. Use a safety cage if available.

When removing and installing wheels, use wheel-handling

equipment adequate for weight involved.

Safety At All Times

Thoroughly  read  and  understand  the  instructions  in  this

manual  before  operation.  Read  all  instructions  noted  on  the

safety decals.

Be familiar with all machine functions.

Operate machinery from the driver’s seat only.

Do not leave machine unattended with tractor engine
running.

Do not stand between the tractor and machine during

hitching.

Keep hands, feet and clothing away from power-driven

parts.

Wear snug-fitting clothing to avoid entanglement with
moving parts.

Watch out for wires, trees, etc., when folding and raising

machine. Make sure all persons are clear of working area.

Summary of Contents for Turbo Max 3500TM













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands