Great Plains
| 586-537Q-ENG | 04/26/2019
28
3500-4000TM
Assembly
Front Light Assembly
101.Fasten LH and RH light brackets to center brace bar
with
1
2
x 3
1
32
x 6 u-bolts ,
1
2
lock washers and nuts.
102.Route light harness lead w/valve from front of hitch
(tractor plug to front), along same route as hydraulic hose
(fasten in same clamps and hose wraps as hoses) to center
brace bar. Plug one end of enhance light harness to
small end of light harness lead w/valve . Plug bigger
end of light harness dual amber into other end of
enhance light module . Route shorter leads over towards
(marked left and right) the front light mounting brackets
as shown. Route long lead along hoses on center frame
tube to rear of machine. This lead will be hooked up as
shown in, See “
103.Mount amber lamp lights to top of light brackets and
, with
1
4
x 1 Gr. 5 hex bolts and
1
4
lock nuts. Plug
lead of amber lamp lights into leads of light harness
dual amber .
104.Tighten all bolts with lock nuts snug, but do not torque.
The rest of the bolts may be tightened to specs, See
” on page 38. Be sure and get all
wiring harnesses fastened up securely with hose wraps or
clamps (if routed close to hydraulic hoses) or use cable
ties .
1
2
3
4
5
4
6
5
6
7
1
2
8
7
6
9
6
3
4
4
1
3
8
7
6
9
9
5
6
6
8
7
Figure 23
Front Lights
43260
2
