GREAT PLAINS TCN5107, Operator'S Manual, Page: 30 / 78

Great Plains | 566-170M | 04/26/2019 Table of Contents Index 24
TCN5107-5313 Table of Contents Index Operating Instructions
Operating Instructions
This section covers general operating procedures. Experience,
machine familiarity, and the following information will lead to
efficient operation and good working habits. Always operate
farm machinery with safety in mind.
Pre-Start Checklist
Perform the following steps before transporting the TCN5107-
5313 Turbo-Chisel to the field.
 Carefully read “ Important Safety Information ” on
page 5.
 Lubricate Turbo-Chisel as indicated under “ Lubrication
and Scheduled Maintenance ” on page 48.
 Check all tires for proper inflation, “ Tire Inflation
Chart ” on page 61.
 Check all bolts, pins, and fasteners. Torque as shown in
“ Torque Values Chart ” on page 62.
 Check Turbo-Chisel for worn or damaged parts. Repair or
replace parts before going to the field.
 Check hydraulic hoses, fittings, and cylinders for leaks.
Repair or replace before going to the field.
High Pressure Fluid Hazard:
Relieve pressure and shut down tractor before connecting,
disconnecting or checking hydraulic lines. Use a piece of
paper or cardboard, NOT BODY PARTS, to check for leaks.
Wear protective gloves and safety glasses or goggles when
working with hydraulic systems. Escaping fluid under pressure
can have sufficient pressure to penetrate the skin causing
serious injury. If an accident occurs, seek immediate medical
assistance from a physician familiar with this type of injury.