GREAT PLAINS NTA3010, Predelivery Manual

Page: 30 / 47

2022 - 04 - 14 Table of Contents 160-220M
NTA3010, NTA3510 and ADC Table of Contents Setup 28
Front to Back Level
Do this with the drill still lowered with the coulters just off
the ground.
Refer to Figure 32
1. Measure from the bottom of the front main tool bar
to the ground.
2. Measure from the bottom of the rear main tool bar
to the ground.
Refer to Figure 33
3. If the rear height is more than
3

16
in (5mm) different,
loosen the jam nuts at the rear lift-assist eyebolts,
and turn the adjust nuts until the height matches
the front. Check height at each side and keep rear
level side-to-side. Re-tighten jam nuts.
Figure 32
Front-to-Back Frame Height
28461
U
D
B
F
3
4
3
4
Figure 33
Adjust Lift-Assist Eyebolt
16127
5
6
5
6