7000 Series Disk
Assembly
Great Plains
| 556-427Q | 2020-01-16
9
Scraper Adjustment
Refer to Figure 6
10. Assemble scraper bars by installing scraper assemblies (1)
on to the tubes in approximate locations, leave the
1
2
x 2
1
32
x 3
1
4
u-bolts (2) lose so that the scrapers can be
moved after the bars are attached to the gang assemblies.
11. Use
1
2
x 2
1
32
x 3
1
4
u-bolts (2) to attach the scraper bar to
the scraper bracket (4).
12. To adjust the disk scrapers loosen the u-bolts (2) that hold
the disk scrapper assembly (1) to the scraper tube (3) and
move the scraper until it is about
1
8
” from the disc blade.
Scrapers are not installed on the front outer most
blades.
Figure 6
Scraper Adjustment
TP-69483
2
1
3
4
2
