2N-2410 & 2N-3010
Operating Instructions
25
8/2/18
196-126M
Once drill is folded over transport carriers, turn off fold
switch. Turn on raise-to-fold switch.
Work tractor hydraulic lever to lower boxes onto carriers.
Turn off raise-to-fold switch.
Folding Harrow Attachment
Before hydraulically folding drill, fold optional coil-tine
harrow as explained below.
Fold right-hand harrow assembly up until locking pin
engages into the first slot on harrow bracket.
Fold left-hand harrow assembly up until locking pin
engages into the second slot on harrow bracket.
Unfolding the Drill
This drill has negative tongue weight when unfolded and
raised. Be certain the drill is hitched securely to your
tractor drawbar and the hitch safety chain is securely
attached to the tractor before raising or unfolding the drill.
To prevent serious injury or death:
Always use transport locks when drill is folded.
Fold only if hydraulics are bled free of air and fully
charged with hydraulic oil.
Stay away from frame sections when they are being
raised or lowered.
Keep away and keep others away when folding or
unfolding drill.
Unfold the drill on level ground with the tractor
transmission in neutral.
1.
On control console, turn on raise-to-fold switch.
2.
Work tractor hydraulic lever to raise boxes off
transport carriers.
3.
Turn off raise-to-fold switch. Turn on fold switch.
4.
Work tractor hydraulic lever to slowly unfold drill
boxes.
5.
When drill is unfolded completely, turn off fold switch.
Turn on transport-lock switch.
6.
Work tractor hydraulic lever to retract transport-lock
cylinders.
If transport-lock cylinders will not retract, drill is not
raised fully. Make sure field-lift cylinders and
transport-lift cylinders are extended fully.
7.
When transport-lock cylinders are retracted, turn off
transport-lock switch. Turn on raise-to-fold switch.
8.
Work tractor hydraulic lever to lower drill.
9.
Turn off raise-to-fold switch.