MATCH LIGHTING
Repeat steps 1 to 4 of “Igniter Lighting
Instructions.”
STEP 5. To match light: push down and turn
the FAR LEFT burner control knob
counterclockwise to the high setting.
STEP 6. IMMEDIATELY strike a match and
position the burning match through match
lighting hole in the grill bottom. Extend the
match near the burner. The burner should
light.
To light the other burners, press in and turn
the ADJACENT control knob. The flame will
track around the burner. Allow the grill to
preheat with the grill lid closed for five to ten
minutes before cooking.
CAUTION: Do not touch any hot grill parts.
The outside of the grill bottom becomes very
hot during use. It may be necessary to use
protective gloves.
STEP 1. Turn the burner-control knob(s) off.
The burner flame will go out.
STEP 2. Turn off the top L.P. cylinder valve
by turning the knob in a clockwise direction
until it stops.
IMPORTANT: Always have the gas shut off at
the L.P. cylinder valve when the grill is not in
use. The L.P. cylinder has a leak detection
feature which will restrict the amount of gas
flow to the burner if the tank shut-off valve has
not been turned off prior to the next use.
HOW TO SHUT OFF THE GRILL
Locating the Match Lighting Hole
The match lighting access hole is located
underneath the side table, on the side of
the grill tub.
Match Light
Access Hole
26
Lighting Instructions
IMPORTANT:
The match lighting hole is
found under the left side table in the side of the
grill bottom. When match lighting the grill, use
the gas control knob on the FAR LEFT-HAND
side (closest to the match lighting hole).
