9
STEP 10:
With the help of a second person. Carefully turn the structure on its side, as
shown below. This makes attaching the head board (I) easier.
Attach head board (I) to side panel B using using 1x cam lock (#2). Turn cam
lock clockwise to lock.
#2
#1
I
#6
B
Hardware for Step 10:
1x #2 Cam Lock
STEP 9:
Attach rod (J) to side panel B using using 1x long screw (#6). Please use the
allen key provided
to tighten the screws.
When selecting rod J, please ensure you use one of the rods with pre drilled
holes at both ends.
J
When selecting the rod. Please en-
sure the rod has a pre drilled hole
at each end, this is important when
securing this part with a screw
B
Turn cam
lock 180
degrees or
until tight.
Hardware for Step 9:
1x #6 35mmL Screws
Allen Key
The help of a second
person may make this
step easier.
