background image

2

Safety Warnings:

• 

Warning: Not suitable for children under 3 years due to small parts 
which may become detached an present a choking hazard.

• 

Adult assembly required. 

• 

Unassembled product contains small parts which may present a 
choking hazard.

• 

Caution, some children may require assistance from an adult when 
manoeuvring the product.

• 

To avoid possible injury from tipping, do not allow children to climb on 
the product. 

• 

Children should be kept away from the product during assembly to 
avoid any possible risk of injury.

• 

Assemble and use on a flat and level surface.

• 

DO NOT use power tools in the assembly of this product as there is a 
risk of over-tightening and consequently splitting of the wood.

• 

This product is heavy, so we recommend that you build it where you 
are planning to use it.

• 

Check all fixtures and fittings regularly and tighten as necessary.

• 

Please retain these instructions for future reference.

Customer Service:
• 

If you find that any components are missing or damaged, please do 
not begin assembly and do not use the item. Please contact GLTC 
Customer Services on 

0344 848 6000 immediately.

• 

We do stock spare hardware packs at our warehouse, so we should be 
able to send you a replacement pack immediately if required.  

Product Care:
• 

Wipe clean using a soft damp cloth followed by a dry cloth.

• 

Do NOT use cleaning products which contain ammonia, solvents or 
abrasive material.

• 

Do NOT expose the item to extremes of heat and humidity.

Could we do better? 
If there is anything you think could be improved in these instructions or in 
the assembly of this product we’d be grateful if you could let us know; we’ll 
pass any helpful hints and tips on to other customers via our website and 
update the instructions. 
All you need to do is drop us a line at 

[email protected] 

Thank you

Summary of Contents for Sixpence Play Shop & Theatre L4446
















Reviews: