E x t r a S t e p : F l o a t i n g B a s e
Bed Base Assembly Guide
Step 1: Side rails
Note: you may notice a small
gap on each corner - this is
one of our essential design
features to stop any potential
wood-on-wood squeak!
Recommended: view the video at quokkabeds.com.au/videos!
Starting at any corner, clip the
side rails on to each of the end
pieces. Note: All brackets on the
bed are designed to be tight,
please apply force to ensure
they are fully seated.
'Stuck' bracket: When
disassembling, if brackets don't
unclip, grab any slat and tap
upwards beneath the beam.
Rest both side rails on the
cross beam before attaching
the front piece. The legs are T
shaped, ensure the top of the T
faces the foot of the base.
Then, twist the 2 included
screws in with the Allen key.
PAGE 2