7
Hardware for Step 8:
Hardware for Step 7:
4x #2 Wooden Dowels
#2
#2
#6
#2
#2
#6
E
F
F
2x #6 Wood Screws
18x #7 Screws (14mm)
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
B
E
G
G
STEP 7:
Attach the 2x batons (F) on each side of the
base panel.
Insert 2x wooden dowels (#2) into the holes
next to the feet. Push the baton into position
and fix in place with 1x screw (#6) using a
phillips screwdriver.
Repeat on remaining side
STEP 8:
Attach the back panels.
Position the top and bottom back panels (G) on the unit with the tongue
and groove facing the inside of the unit. Check the alignment of the holes in
the panels with those on the unit. Note the half-moon holes on both panels
should meet in the middle as the join together.
Using your Philips screwdriver, fix the panels in place with x18 screws (#7).
Please note that the 2x pilot holes indicated at the top of the unit are to
attach anti-tip kit included separately with this item.
Please note:
These arrows indicate the drill
holes used for the anti-tip kit
brackets & hardware included
in with your unit. Do not use
hardware #7 in these holes.
