6
Hardware for Step 5:
4x #2 Wooden Dowels
4x #3 Cam Locks
Hardware for Step 6:
#3
#3
#3
#3
A
#2
#2
#3
#2
#2
C
B
D
C
B
E
A
#5
#2
#5
#2
#4
#4
#2
#5
#4
#4
#2
#5
#5
#4
4x #5 Barrel Nuts
4x #4 Crosshead Bolts
#2
D
STEP 5:
Insert 4x wooden dowels (#2) into the inner
holes on the top panel (D) then position onto the
unit with the recessed edge facing up.
Once in place, insert 4x cam locks (#3) into the
larger holes on the side panels and turn clockwise
to secure the top panel in place.
TOP
BASE
Position the base panel (E) with the recessed
edge facing up and push into position. Fix in
place using 4x crosshead bolts (#4) applied
through the base into the side panels.
Fully tighten bolts using a Philips screwdriver
4x #2 Wooden Dowels
STEP 6:
Attach the base panel (E) to the unit.
Insert 4x wooden dowels (#2) to the outer
holes in the ends of the side panels as shown.
Insert 4x barrel nuts (#5) into the holes on
the inside of the side panels, ensuring the hole
in the nut is facing towards the base.
