9
CASTER AND LEVELER MOUNTING
CAUTION
• To install casters or levelers the enclosure must be tipped onto its
side. The enclosure can be very heavy; several people will be
required in this process. Please practice safe lifting techniques.
• DO NOT lay the enclosure on its front or back, this may damage the
door hinges.
• Removing doors and sides will help reduce the weight of the
enclosure.
• Before tipping, remove the side panels to prevent damage to the
locks and latches.
ADJUSTABLE LEVELER MOUNTING
On the bottom of the cabinet there are eight threaded holes, two in each
corner. The outside holes are threaded 1/2"-13 thds. and will accept
the levelers. Once the levelers (7209-HD or 7209-4HD) are installed,
the cabinet level can be adjusted with the use of a 5/8" open wrench
when adjusting from the outside or a 3/8" closed wrench/socket when
adjusting from the inside.
ANCHOR MOUNTING THRU HOLE
The middle .75 dia. thru holes are for securing the enclosure to the
floor. These holes will accept a standard concrete anchor if desired; the
Seismic Anchor Kit (AK101) is suggested.
CASTER MOUNTING
The four inside holes in each corner are threaded 1/2"-13 thds. to
accept the casters.
Be sure to thread the caster into the bottom of the
cabinet until it is firmly seated.
.75 Thru holes
(4) Adjustable
Levelers
Swivel Casters
Counter clockwise rotation will
adjust the leveling glide up
Clockwise rotation will adjust
the leveling glide down
