12
STANDARD POWER STRIP MOUNTING
For your convenience, we have provided mounting
brackets in the left rear and right rear corners of the
enclosure for mounting power strips vertically.
Typically, any power strip shipped with
an enclosure will be installed at the
manufacturer. To install a power strip
in the field, remove the #10-32 x 1/2"
screws that secure the bracket to the frame.
Place the power strip into the corner
post of the frame and then place one
bracket between the top two outlets
and install the #10-32 x 1/2"
screw into the threaded hole in
the frame. Then place the other
bracket over the power strip
between the bottom two outlets
and secure to the frame with the
same type of screw.
POWER
When using power distribution units (PDUs), each PDU should be
connected to a committed branch circuit that is rated for the continuous
load of all the equipment connected. When not using a PDU, each piece
of equipment should be connected to a dedicated branch circuit.
DETAIL A
