Grease Guardian GGX15, Installation Operation & Maintenance, Page: 15 / 32

15
skiMMeR dURAtion scReen
The default for the X7 unit is 600 seconds ON
and 300 seconds OFF. To adjust: use keys "-"
& "+" to navigate to the ON value. Then press
"OK" to lock on to the value. Next use "-" &
"+" again to increase or decrease the value.
Confirm the setting by pressing "OK" again.
Next move the cursor using "-" & "+" to the
OFF value and repeat the setting procedure,
confirming settings with "OK".
solenoid wAsH settinG scReen
In GGX7 units and any X15-35 unit with a
solenoid upgrade, pressing "A" again after
the Skimmer Duration screen settings are
complete will call up the solenoid duration
display. This display sets time limits for water
flowing to the spray bar. The default on this
unit is 5 ON and 55 OFF. To adjust: use keys
"-" & "+" to navigate to the ON value. Then
press "OK" to lock on to the value. Next use
"-" & "+" again to increase or decrease the
value. Confirm the setting by pressing "OK"
again. Next move the cursor using "-" &
"+" to the OFF value and repeat the setting
procedure, confirming settings with "OK".
After all settings are made, Return to Home
Screen by pressing ESC.
SKIM DURATION
ON(SECONDS) : 00600
OFF(SECONDS): 00300
SOLENOID DURATION
(ON SECONDS) 00005
(OFF SECONDS) 00055
Additional program screen for solenoid equipped
Units, including GGX7 standard
Wiring Diagram for GGX7 and other solenoid equipped units is in the Appendix section
AdditionAl scReen: