Grease Guardian GGX15, Installation Operation & Maintenance, Page: 11 / 32

11
week day setting
Note: The controller is factory set with all 7 days set to active.
Only reprogram if this is not suitable and there is a requirement that the unit
does not need to operate on particular days during the week.
From the main display access the above display
by pressing OK and ESC together. Choose
“
Parameter ” using - or + keys then press OK.
The above display will show. Next using only the
“-” key move the cursor to the “D:MTWTFSS”
block (days of week). To access particular day
value press OK. Then press “-” to cancel any
day. Pressing OK confirms cancella- tion and
moves the cursor to the next day. On reaching
final day value, S, press OK to confirm all.
Example:
Controller set to OFF at weekends; the display is
configured as above. Press ESC to exit to home
display.