19
You can program a 2-second delay in these ways:
•
If the scanner is scanning and stops on an active chan-
nel, quickly press
•
/DELAY
before it continues scanning
again.
•
If the desired channel is not selected, manually select the
channel, then press
•
/DELAY
.
•
If the scanner is in the search mode, press
•
/DELAY
while
the scanner is searching.
DLY
appears on the display and
the scanner automatically adds a 2-second delay to ev-
ery transmission it stops on.
To turn off the 2-second delay, press
•
/DELAY
while the scan-
ner is monitoring the channel or frequency.
DLY
disappears
from the display.
TURNING THE KEY TONE ON AND OFF
Each time you press any of the scanner's keys, the scanner
sounds a tone.
Follow these steps to turn the scanner's key tone on or off.
1. If the scanner is on, turn
VOLUME
counterclockwise until
it clicks to turn it off.
2. While you press and hold down
2
and
ENT
, turn on the
scanner.
3. After a second, release
2
and
ENT
.
BATTERY-SAVING FEATURE
Your scanner has been equipped with a battery-saving cir-
cuit. This feature sends the unit into a standby mode, which
uses only 30 percent of the available power, if no signal is
detected within a 5 second time interval,
P.–SA
(power save)
appears in the display.
The scanner will continue to operate in the standby mode
until it receives a signal or you press a button.
PSR216OM.p65
2004/04/08, 16:50
Page 19
Adobe PageMaker 6.5J/Win
