5
FUNCTION AND PURPOSE OF LIFT
This lift is designed to lift loads—it is not designed to support loads once lifted. Thus, this lift must always be used
in conjunction with appropriate and adequate vehicle support stands. Also, this lift is designed to lift certain loads
(e.g., vehicles, trailers) in specific ways (one end and never on the side). NEVER attempt to use this lift in ways for
which it was not designed. If you have lifting needs that cannot be met by this lift, do not attempt to modify the
lift or use it for purposes other than those for which it was designed—always use a lifting device that is
appropriate for the load. Do not use adapters and/or attachments from other units. Consult parts list for
adapters and/or attachments that can be used on this product, not to exceed maximum lift height of 50”.
Contact the manufacturer if you have any questions about other lifts or the appropriateness of this lift for
different types of jobs.
1. OPERATING INSTRUCTIONS
WARNING
Using the jack to raise vehicles requires several steps that must be followed each and every time the jack is
used.
1.
Inspect the jack for signs of wear or damage.
2.
Transport the jack to the work area.
3.
Select appropriate vehicle support stands and bring them to the immediate work area.
4.
Prepare the surrounding area before using the jack.
5.
Identify lifting points and prepare the load for lifting.
6.
Raise the vehicle.
7.
Use appropriate vehicle support stands.
8.
Lower the vehicle.
Each of these steps is discussed in detail in the following sections. Failure to follow all these instructions can lead
to serious injury or death.
1.1 Inspect the Jack for Signs of Wear or Damage
Before each use, you should inspect the jack for any visible signs of wear or damage. See the “Inspecting the
Lift” section for details about how to inspect the jack.
If you see any signs of wear or damage, or if there is any indication that the jack is not
performing normally, immediately take it out of service and call the manufacturer using the
contact information on the back cover of this manual. Never use a jack that appears
damaged in any way.
1.2 Transport the Jack to the Work Area
Transport the jack to the work area by pushing it in the fully lowered position. When moving this lift around the
shop floor, it must never be moved while in the raised position. Wheel the jack only across hard level surfaces.
Use only the handles provided as the means by which you grab the lift and move it. The lift should NEVER be
tilted backwards for any reason (i.e., to clear an obstacle on the floor, to move under an elevated obstacle, etc.).
Tilting the lift can cause the lift to fall backwards onto the operator or someone who might be nearby. If the lift
ever does fall, for whatever reason, get out of the way immediately—NEVER try to catch the lift if it falls
backwards.
WARNING
