M20 PIX Machine - Electronic Engraving machine . 22
First Contact
To adjust the machine M20 PIX on the Z axis
1. Power up the machine and wait a few moments.
2. Use the spindle with the diamond tip and without spindle pressure (position (1)) and place an
engraving plate with a depth of 2.4mm onto the vice.
3. Press the
keys simultaneously.
The tool-holder moves towards the centre of the vice.
The spindle lowers until the diamond tip touches the plate.
4. Set the zero point (0,0,0) on the machine's Z axis using the 2 keys
and
.
5. Save the position of the zero point O(0,0,0) on the Z axis by pressing the
key for 3 seconds
until it shortly beeps.
