M20 PIX Machine - Electronic Engraving machine . 12
First Contact
Connecting the M20 PIX machine to a PC
The computer and the M20 PIX Machine must both be switched off.
As PCs and the Windows
®
graphical environment are in widespread use in the IT sector,
we have used these products as the basis for defining the installation and operating pro
-
cedure for the M20 PIX machine
If you don’t have equipment which is compatible and you encounter some problems of installation or use, contact your
Gravograph agent.
Connection cables
• Use Gravograph connection cables (consult your Gravograph distributor for the products available).
These cables are adapted for the machines to which they will be connected.
They must be in conformity with the electromagnetic compatibility standards, norm EN 55022 - class B and protect
from external electric «attacks» (conform to the norms of immunity and CEM susceptibility).
• Do not use cables which are too long. Keep the machines as close as possible and use a short a cable as possible.
• Separate the mains cable and the transmission cable (avoid connecting the transmission and mains cables to the same
socket, etc ...).
Follow the connection procedure depending on the connection cable supplied with the
M20 PIX machine.
The machine is delivered with the following cables :
• USB cable (P)
Connecting the M20 PIX machine/PC via an USB link
1. Plug the USB cable (P) into the USB port
of the machine
(pict. 1)
.
