Gravely 99108 Compact Pro 34 Operator'S Manual Download Page 7

GB - 7

ALWAYS remove key and/or wire from spark 
plug before assembly. Unintentional engine 
start up can cause death or serious injury.

Complete a walk around inspection of unit 
and work area to understand:

  • Work area   • Your unit   • All safety decals
Determine which attachments are needed 
and can be used safely.

Inspect unit before each use for: missing or 
damaged decals and shields, correctly 
operating safety interlock system, and 
deterioration of grass catchers. Replace or 
repair as needed.

ALWAYS check overhead and side 
clearances carefully before operation. 
ALWAYS be aware of traffic when operating 
along streets or curbs.
Keep children and people away. 

Keep children out of work area and under 
watchful care of a responsible adult.

Keep area of operation clear of all toys, pets, 
and debris. Thrown objects can cause injury. 
Check for weak spots on docks, ramps or 
floors. Avoid uneven work areas and rough 
terrain. Stay alert for hidden hazards or traffic.

DO NOT operate near drop-offs, ditches, or 
embankments. Unit can suddenly turn over if 
a wheel is over the edge of a cliff or ditch, or if 
an edge caves in.

Data indicates that operators, age 60 and 
above, are involved in a larger percentage of 
riding mower related injuries. These 
operators should evaluate their ability to 
operate the riding mower safely enough to 
protect themselves and others from serious 
injury.
Read the entire Owner/Operator manual and 
other training material. If the operator or the 
mechanic cannot read the manual, it is the 
owner’s responsibility to explain it to them. 
Only the user can prevent and is responsible 
for accidents or injuries occurring to 
themselves, other people or property.

Only trained adults may operate or service 
unit. Training includes actual operation.

Local regulations may restrict the age of the 
operator.
NEVER allow children to operate or play on 
or near unit. Be alert and shut off unit if 
children enter area.

NEVER operate unit after or during the use of 
medication, drugs or alcohol. Safe operation 
requires your complete and unimpaired 
attention at all times.

DO NOT wear loose clothing or jewelry and 
tie back hair that may get caught in rotating 
parts.

Wear adequate outer garments.

NEVER wear open sandals or canvas shoes 
during operation. Wear adequate safety gear, 
protective gloves and footwear.
Wear proper footwear to improve footing on 
slippery surfaces.

Always wear safety goggles or safety glasses 
with side shields when operating mower.

Moving parts can cut or amputate fingers or a 
hand. Wrap blade(s) or wear gloves to 
service. On multiblade mowers, rotation of 
one blade will cause all blades to rotate.
NEVER place your hands or any part of your 
body or clothing inside or near any moving 
part while unit is running.

ALWAYS keep hands and feet away from all 
rotating parts during operation. Rotating parts 
can cut off body parts.

ALWAYS keep body and hands away from 
pin holes or nozzles which eject hydraulic 
fluid under pressure.
DO NOT touch parts which are hot. Allow 
parts to cool.

ALWAYS keep hands and feet away from all 
pinch points.

Fumes from the engine exhaust can cause 
death or serious injury. DO NOT run engine in 
an enclosed area. Always provide good 
ventilation.
Read, understand, and follow all instructions 
in the manual and on the machine before 
starting. Understand:

How to operate all controls

The functions of all controls

How to STOP in an Emergency

Braking and steering characteristics

Turning radius and clearances

Keep safety devices or guards in place and 
functioning properly. NEVER modify or 
remove safety devices.

Do not operate without either entire grass 
catcher or the discharge guard in place.

Stop engine before removing grass catcher or 
unclogging chute.
Ensure Safety Interlock System is functioning 
properly. DO NOT operate unit if safety 
interlock is damaged or disabled.

Start and operate unit only when seated in 
operator’s position. Steering control levers 
must be in neutral, PTO disengaged and 
parking brake set when starting engine.

Summary of Contents for 99108 Compact Pro 34





































Reviews: