GB - 16
OPENING AND CLOSING THE
HOOD
Unhook the two rubber latches to tip hood
back. Close hood and secure with rubber
latches (figure 13).
REMOVE MOWER DECK
Remove (Figure 14)
1. Remove PTO belt from electric clutch
(see PTO Belt Replacement on
page 22).
NOTE: Perform step 2 and 3 for the right and
left side of unit.
2. Remove guide arm from front mount
bracket.
3. Remove rear lift link, rear trunnion, front
lift link, and front trunnion from mower
deck and mower lift.
4. Slide mower deck out from under unit.
Install (Figure 14)
1. Slide mower deck under unit.
NOTE: Perform step 2 and 3 for the right and
left side of unit.
2. Install rear lift link, rear trunnion, front lift
link, and front trunnion on mower deck
and mower lift.
3. Install guide arm on front mount bracket.
4. Install PTO belt on electric clutch (see
PTO Belt Replacement on page 22).
Figure 13
OE0140
1
1. Rubber Latch
2. Hood Tipped Open
2
