GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
No liability for printing errors. Technical modifications reserved!
03/2011
7
Prepare the rudder servo by pressing the rubber
grommets into the servo mounting lugs, and pushing
the brass spacer sleeves through the grommets from
the underside. Place the rudder servo in the
appropriate aperture and fit the retaining screws.
Use a 2 mm Ø bit to drill out the centre hole in the
double-sided servo output lever. Fit the angled end of
the pre-formed pushrod in the hole, and secure it with
the retaining clip. The prepared output lever can now
be screwed to the servo, after setting it to centre from
the transmitter.
