GRAUPNER Polaron, Operating Instructions Manual

Page: 15 / 24

29 30
NORMAL DATA CYCLE DATA GRAPH DATA CONFIG MODE 1
CONFIG MODE 2
CONFIG MODE 3 CONFIG MODE 4
▲ ▲ ▲ ▲
▲
▲ ▲
DC-IN : DC Input Values from the rear
side (DC 11 ~ 15V). The values shall be
automatically activated after connecting.
AC-IN : AC Input Values from the
rear side. The values shall be auto-
matically activated after connecting.
Charge time Discharge time
Cycle number
Peak voltage Average voltage
Charge capacity
Discharge capacity
Internal impedance
of charge battery Internal impedance
of discharge battery
1) NORMAL DATA : Real time display of the input/output voltage, temperature, resistance of
battery.
2) CYCLE DATA : Display of the data according to the cycle number.
- Charge/discharge time: Displays the total time of the charge/discharge process.
- Peak voltage : Display of the max voltage during the charging process.
- Average voltage : Display of the average voltage during the discharging process.
- Charge/discharge capacity : Display of the charge/discharge capacity at completion.
- Internal impedance of the battery : Display of the internal impedance during charging/dis
charging.
3) GRAPH DATA : Display of the graph with the operating voltage, current, and temperature.
The graph reflects the programmed data, entered either automatically or
manually.
◎ USER SETUP PAGE
Tap the USER SET icon on the main page to access to user setup modes (4 modes). The
data can be programmed. The page can be navigated by tapping the DEC/INC buttons.
Tap the USER SET icon to program
the user setup on the main page.
Finish Sound : 10 types of sounds are available.
Sound Time : The times available for the charger are
ON, OFF, 5sec, 15sec, and 1min.
Beep : This parameter can be turned on/off to select
either an internal or an external button.
LCD Bright : Backlight brightness can be adjusted
(1-20 steps).
Temp. Scale : The temperature unit can be changed.
Sound Vol. : The sound level can be adjusted. (1-5 steps)
CH1 user setup of can be set at CONFIG
MODE 1-4.
Only the Finish sound of CONFIG MODE 1
in CH2 user setup can be set
Date & Time : Date, month, year, time setup
Alarm 1 : The first alarm time setup.
When not in use, set to OFF
Alarm 2 : The second alarm time setup.
When not in use, set to OFF User Name : Enter user name
Language : Not yet applicable
Option : Not yet applicable
The Wattage Setting of the User’s SMPS
from the rear side
The Voltage & Current Setting of the User’s
SMPS from the rear side
Output Sharing of Ch.1 and Ch.2
(Wattage with percentage)
Low Voltage Error Setting