18
Charge modes for the POLARON AC/DC CHARGER
CC-CV : Normal charge.
FAST : Fast charge.
STORE : Normal store charge.
CV-LINK : The packs that have the same number of cells and capacity
can be charged simultaneously (If the cells are different, errors can occur.)
AUTO : The charge will automatically adjust the charging conditions.
NORMAL : Normal charge conditions.
LINEAR : The preset current is maintained throughout the charge.
CC-CV : Normal charge.
In the CV-LINK mode, the packs should have the same voltage, capacity and number
of cells. With variances in the charging parameters, damage to the batteries can occur.
Please install a balance cable to each CH1 and CH2 with output cable.
LiPo, LiIon, LiFe
NiCd, NiMH
Pb
Screen for the cycle start. According to the configured
voltage and current values, it will be presented.
The configured current could be limited for the capacity.
Max charge is 120W.
After cycle start, to change the charge current, tap the
related part and you can change the desired current at the
white colored screen. After configuration, tap it again and
you can escape from the setting. This configuration shall
be applied for the current charge operation NOT for charge
data configuration.
Tap the current part and you can check the related data.
Please refer to the data view page
To finish the charge mode in operation, tap the Esc and
the charge mode will be stopped. And it becomes stand-by
status.
(3) Charge Process
(4) Current Change during charging