GRAUPNER m-12 HOTT, Operating Instruction

Page: 19 / 77

- thermal quick link의 의의의의 ON의의 의의의의 normal의의 thermal의 의의의의 ON 의의 의의의 의의의
의의.
- thermal quick link의 의의의의 ON의의 의의의의 normal의의 thermal의 의의의의 ON 의의 의의의 의의의
의의.
After completing the normal quick link adjustment, press the direction button to select the
thermal quick link line. The thermal quick link and speed quick link can be programmed in
the same method. If you already set the quick link switch and the switch is ON, the cursor is
automatically moved to the corresponding quick link value.
If the thermal quick link switch is ON, the cursor is moved to the
thermal quick link and the user can check the thermal quick link is ON
If the speed quick link switch is ON, the cursor is moved to the speed
quick link and the user can check the speed quick link is ON
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
press
press
press
2-1. Model type (Helicopter) : 5 functions are available
• Swashplate
Use the swashplate function to set the swahplate type to match your Helicopter model.
It supports 6 value (1servo, 2 servo,3sv(2rol),3sv(140),3sv(2nic),4sv(90))
• Cut off
The cut off function allows to turn off the internal combustion engine or the electric motor.
• Rotor direct
Use the rotor direct function to set the rotation direction of the main rotor.
• Pitch min
Use the pitch min function to reverse the servo direction in all of pitch, elevator, aileron and
throttle
channels, the default value is rear. Available settings are rear and front.
19