GRAUPNER m-12 HOTT, Operating Instruction

Page: 9 / 77

ENT
ESC
TEL VIW
2. The model men is highlighted then press the direction button to highlight RF sett. 4. After completing the bind, press the ESC button to return to the home screen.
3. Press the ENT button, the cursor is automatically on the stick mode line then press the
direction button to select the hyphen in the rx bind line. Turn on the receiver then press the
ENT button on the receiver for over 3 seconds so that the receiver enter the binding mode.
Press the ENT button of the transmitter, the system will be connected within a few seconds
and the model name of the receiver is displayed on the screen.
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
press
1. Model mem (Aircraft and Helicopter)
The model mem (model memory) contains 4 categories: select model, model name, clear
model and copy model.
• Select model : It is used to add or select model of the already set 10 models.
• Model name : The Model Name function allows you to name a model. This makes identify-
ing and selecting models much easier.
• Clear model : Clear Model is used to remove the programmed model you will no longer be
flying. No other model memories will be affected.
• Copy mod->mod : Copy model function copies the currently selected model’s programmed
value to another model list.
• The Transmitter Programming Setup
ENT
ESC
TEL VIW
press
9