9 / 20
S1012_GR-12L_DE_V1sh
Installa
tion
The receiver must be protected against dust, exhaust gases, splash
water, etc. in the model. When you install your receiver, make sure
that it is not excessively
airtig
ht to prevent it from overhea
ting
during
opera
tion.
Servo cables may not be wound around antennas or run next to
them. Make sure that the cables cannot
shift
to lie directly adjacent
to ant
ennas during flig
ht.
In the case of carbon
fib
re fuselage, at least the last 35 mm of the
antennas shall be routed from the fuselage.
Connections
Connect the devices that have to be connected to the receiver to the
row of sockets on one end of the receiver. The servo c
onnections
of
the
Graupner
-HoTT receiver are numbered.
The polarity of the plug-in system cannot be reversed. Do not apply
force.
Note
For the
GR-12L
HoTT receiver, insert the connectors with the brown
or black cable upwards.