11 / 20
S1012_GR-12L_DE_V1sh
If the red LED of the
GR-12L HoTT
lights up again constantly, the
"Binding" has failed. Change the
positions
of the associated
antennas and try the en
tire pro
cedure again.
Receiver reset
To reset the receiver, press and hold its SET bu
tt
on while turning on
the power to the receiver:
If the reset was triggered with the transmi
tt
er switched o
ff
or with
an unbound receiver, the red LED of the receiver
GR-12L HoTT
starts
t
o flash
a
ft
er about 3 seconds. The bu
tt
on will now be released.
If the reset is performed with a not bound receiver, you can then
start a binding process at an
y time.
If a reset has already been performed on an already-bound receiver
and the associated model memory is
acti
ve in the switched-on trans-
mi
tt
er, then the red LED of the receiver
GR-12L HoTT
should go out
and thus signal a correct c
onnection
to the transmi
tt
er. Otherwise
the process has to be repeated.
Notes
•
Through a RESET
ALL
of the se
ttings
in the receiver are brought
to the factory se
ttings
with the excep
tion
of the HoTT synchro-
niza
tion i
nforma
tion!
•
If a reset is performed accidentally, all of these se
ttings
that
were made using the "Telemetry" menu in the receiver should
be restored.
•
Rese
tting
is
particularly
recommendable when you want to
switch a receiver to a di
ff
erent model. This makes it easy to keep
se
ttings which do not m
atch from being transferred.