GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors.
11/2013
3
The illustration shows the fixings (hook-and-loop tape) for the LiPo flight battery, the
M2.5 x 16 retaining screws for the V-tail assembly, and the M2.5 x 5 clamping screw
for the swivel pushrod connector. You will find these parts in the polythene bag of
small hardware items.
The photo shows the V-tail assembly unscrewed from the fuselage, with the tail
pushrods fitted through the connector barrels. Set both servos to centre before
tightening the clamping screws, and grip the barrel firmly in a pair of pliers while you
tighten the screw.
Caution: the pushrods must be securely clamped once you
have tightened the screws. If a pushrod comes adrift, the model could crash.
The canopy is opened by holding it at the rear on both sides, and pulling it upwards.
