GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler! Ident-Nr. 0057999
Made in Thailand
04/2003
71
71
54
2 brass tubes, 6.4 Ø x 1000
Wing incidence pegs
55
8 clevises, M3
Aileron linkage
56
5 clevises, M2.5
Rudder / Vector /
Speedbrake linkage
56a
2 self-locking nuts, M6
Securing part 13
57
3 ball-links, M2.5
58
8 locknuts, M3
Aileron pushrods
59
9 locknuts, M2.5
Rudder / Vector linkage
60
3 ball-links
Rudder / Vector pipe
61
3 self-locking nuts, M2
Securing part 60
62
2 sheet metal servo mounts
Thrust vector servo
63
6 self-tapping screws, M2.6 x 6.5
Securing part 62
64
4 socket-head cap screws, M3 x 10
Vector servo
65
4 self-locking nuts, M3
Part 64
66
4 washers, 6 Ø x 3.2
Part 64
67
CFRP rod, 5 Ø x 1000
Fueltank supports
68
4 captive nuts, M3
Turbine mounting
69
Cyano-acrylate adhesive
70
UHU plus endfest 300
71
Soft binding wire
72
Decal sheet
HARPOON II
Supplementary Building Instructions - Harpoon 2
Important note:
The building instructions for the Harpoon 2 are based on the earlier instructions supplied with the
previous version of the model, which means that the second section - the Appendix - only covers important
changes and new procedures. Most of the difficult stages have been completed by the manufacturer, but in
any case they are also covered by the Harpoon 1 instructions. The expanded building instructions also
describe and illustrate virtually every stage of building. In most cases you will find that the photos are
easier to understand than complex text instructions. Before you start building the model it is essential to
read right through the instructions, from start to finish, and to study the illustrated procedures.
The construction of this model requires a high level of technical knowledge, manual skill and piloting
experience. Operating a model with a jet engine calls for a highly circumspect approach and specialised
technical expertise. Please read and observe the Safety Notes in the Operating Instructions.
RC functions
Turbine power (throttle stick)
Nosewheel steering (coupled to rudder using Magic-Box, Order No. 3162, or Y-lead)
Elevons (combined ailerons / elevators); four servos: two per wing panel, coupled using Magic-Boxes, No. 3162
Rudder; two servos (1 servo per rudder, coupled to nosewheel using Magic-Box, Order No. 3162, or Y-lead)
Retractable undercarriage
Wheelbrakes
Optional speedbrake (airbrake)
Canards
Thrust vectoring pipe
Recommended radio control systems
GRAUPNER/JR mc-20, mc-22, mc-24 or mx-22 35 MHz computer system. This applies to Germany; you may
have to use a different frequency band for your country.
